Photoshop: Metal Effects, Painting Eye, Planet

Metal Effects

Painting Eye

Planet

Photoshop: Dot Attacks, Grid, Thunder

Dot Attacks:

Grid:

Thunder:

Photoshop: Bubles, Burns, Cloud

Bubles:

Burns:

Cloud:

Origami: Karasu, Frog, Kazaguruma

Karasu:

Frog:

Kazaguruma:

Origami: Ikan Kembung, Ikan Mas, Induk Ayam, Jerapah, Kabuto

Ikan Kembung:

Ikan Mas:

Induk Ayam:

Jerapah:

Kabuto:

Origami: Crane, Ninja Star, Computer Mouse, Crayfish, Wheel

Crane:

Ninja Star:

Computer Mouse:

Crayfish:

Wheel:

Basic learning of origami

You must click the thumbnails to view the original size

Origami - Let's Folding!

Origami (折り紙, origami?) (from ori meaning "folding", and kami meaning "paper") is the ancient Japanese art of paper folding. The goal of this art is to create a given result using geometric folds and crease patterns preferably without the use of gluing or cutting the paper medium. "Origami" nowadays refers to all types of paper folding, even those of non-Asian origin.

Origami only uses a small number of different folds, but they can be combined in a variety of ways to make intricate designs. In general, these designs begin with a square sheet of paper whose sides may be different colors or prints. Contrary to most popular belief, traditional Japanese origami, which has been practiced since the Edo era (1603-1867), has often been less strict about these conventions, sometimes cutting the paper during the creation of the design.
(From: http://en.wikipedia.org/wiki/Origami)

Here's some sample:

10 reasons why PCs crash U must Know

“Fatal error: the system has become unstable or is busy,” it says. “Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications.”

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1. Hardware conflict
The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow ‘!’ appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as ‘IRQ holder for PCI steering’. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2. Bad Ram
Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3. BIOS settings
Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer’s display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to ‘yes’ to allow Windows to do this.).

Download the rest of tutorial here...

All about FTP you must read

Setting Up A Ftp:

Well, since many of us have always wondered this, here it is. Long and drawn out. Also, before attempting this, realize one thing; You will have to give up your time, effort, bandwidth, and security to have a quality ftp server.

That being said, here it goes. First of all, find out if your IP (Internet Protocol) is static (not changing) or dynamic (changes everytime you log on). To do this, first consider the fact if you have a dial up modem. If you do, chances are about 999 999 out of 1 000 000 that your IP is dynamic. To make it static, just go to a place like http://www.myftp.org/ to register for a static ip address.

You’ll then need to get your IP. This can be done by doing this:
Going to Start -> Run -> winipcfg or www.ask.com and asking ‘What is my IP?’

After doing so, you’ll need to download an FTP server client. Personally, I’d recommend G6 FTP Server, Serv-U FTPor Bullitproof v2.15 all three of which are extremely reliable, and the norm of the ftp world.

You can download them on this site: http://www.liaokai.com/softw_en/d_index.htm

First, you’ll have to set up your ftp. For this guide, I will use step-by-step instructions for G6. First, you’ll have to go into ‘Setup -> General’. From here, type in your port # (default is 21). I recommend something unique, or something a bit larger (ex: 3069). If you want to, check the number of max users (this sets the amount of simultaneous maximum users on your server at once performing actions - The more on at once, the slower the connection and vice versa).

The below options are then chooseable:
- Launch with windows
- Activate FTP Server on Start-up
- Put into tray on startup
- Allow multiple instances
- Show “Loading…” status at startup
- Scan drive(s) at startup
- Confirm exit

You can do what you want with these, as they are pretty self explanatory. The scan drive feature is nice, as is the 2nd and the last option. From here, click the ‘options’ text on the left column.

To protect your server, you should check ‘login check’ and ‘password check’, ‘Show relative path (a must!)’, and any other options you feel you’ll need. After doing so, click the ‘advanced’ text in the left column. You should then leave the buffer size on the default (unless of course you know what you’re doing ), and then allow the type of ftp you want.

Uploading and downloading is usually good, but it’s up to you if you want to allow uploads and/or downloads. For the server priority, that will determine how much conventional memory will be used and how much ‘effort’ will go into making your server run smoothly.

Anti-hammering is also good, as it prevents people from slowing down your speed. From here, click ‘Log Options’ from the left column. If you would like to see and record every single command and clutter up your screen, leave the defaults.

But, if you would like to see what is going on with the lowest possible space taken, click ‘Screen’ in the top column. You should then check off ‘Log successful logins’, and all of the options in the client directry, except ‘Log directory changes’. After doing so, click ‘Ok’ in the bottom left corner.

You will then have to go into ‘Setup -> User Accounts’ (or ctrl & u). From here, you should click on the right most column, and right click. Choose ‘Add’, and choose the username(s) you would like people to have access to.

After giving a name (ex: themoonlanding), you will have to give them a set password in the bottom column (ex: wasfaked). For the ‘Home IP’ directory, (if you registered with a static server, check ‘All IP Homes’. If your IP is static by default, choose your IP from the list. You will then have to right click in the very center column, and choose ‘Add’.

From here, you will have to set the directory you want the people to have access to. After choosing the directory, I suggest you choose the options ‘Read’, ‘List’, and ‘Subdirs’, unless of course you know what you’re doing . After doing so, make an ‘upload’ folder in the directory, and choose to ‘add’ this folder seperately to the center column. Choose ‘write’, ‘append’, ‘make’, ‘list’, and ’subdirs’. This will allow them to upload only to specific folders (your upload folder).

Now click on ‘Miscellaneous’ from the left column. Choose ‘enable account’, your time-out (how long it takes for people to remain idle before you automatically kick them off), the maximum number of users for this name, the maximum number of connections allowed simultaneously for one ip address, show relative path (a must!), and any other things at the bottom you’d like to have. Now click ‘Ok’.

**Requested**

From this main menu, click the little boxing glove icon in the top corner, and right click and unchoose the hit-o-meter for both uploads and downloads (with this you can monitor IP activity). Now click the lightning bolt, and your server is now up and running.

Post your ftp info, like this:

213.10.93.141 (or something else, such as: ‘ftp://example.getmyip.com’)

User: *** (The username of the client)

Pass: *** (The password)

Port: *** (The port number you chose)

So make a FTP and join the FTP section

Download the rest of tutorial here...